Costway TW10082 Instructions page 5

1
6
Step 1: Assembling the Leg Tubes
Place the Leg Tube(#6) and T Section A(#4) as shown in the picture.
Please slide the Leg Tube(#6) into the T Section A(#4).
Please make sure that the locking holes of the T Section A(#4) are
facing inwards to the Jumping Mat(#1) .
08
EN
ASSEMBLY
2
Please Note：Make sure the
markings of "UP" on Vertical
Tube(#7) upward and outward.
Step 2:Assembling the Vertical Tubes
2.1 Connect the Vertical Tube(#7) with the T Section A(#4).
Ensure that the locking pin is aligned with the locking hole and the
pin locks into the secured position.
2.2 Secure the Vertical Tube(#7) to the Leg Tube(#6) with Long
Bolt(13#), Washer(#12) and Nut(#14) using Spanner(#17).
09