Publicité
Les langues disponibles
Les langues disponibles
To store channels
1
While receiving the channel that you want to store,
touch and hold a number key (1 to 6).
To receive the stored channel, touch a number key
(1 to 6).
To set a parental control
The parental control feature allows you to limit
access to SiriusXM channels with mature content.
When enabled, the parental control feature requires
you to enter a passcode to tune to the locked
channels. Information on setting up the passcode
and locking channels can be found below.
1
Touch
, then touch [Parental Control].
The passcode input display appears.
2
Enter your 4-digit passcode by touching the
number keys, then touch [OK].
The passcode confirmation display appears.
3
Enter the 4-digit passcode again, then touch [OK].
The parental control is applied, and the channels are
locked.
To unlock the channels/To lock the channels
again
1
Touch
, then touch [Parental Control].
The passcode input display appears.
2
Enter your 4-digit passcode by touching the
number keys, then touch [OK].
To change the passcode
1
Touch
, touch [Pass Code Change], then enter
your current passcode.
2
Enter your new passcode.
Using SXM Option Functions
The following functions are available by touching
.
Parental Control
Set the parental lock to on or off, and edit the
passcode.
Pass Code Change
Change the passcode for the Parental Control
feature.
12
GB
Playback
Playing a USB Device
MSC (Mass Storage Class) type USB devices*
compliant with the USB standard can be used.
* e.g., a USB flash drive, digital media player
Notes
• USB devices formatted with file systems FAT12/16/32/
exFAT are supported.
• For details on the compatibility of your USB device, visit
the support site on the back cover.
• For details on the supported file formats, see "Supported
formats for USB playback" (page 19).
1
Turn down the volume on the unit.
2
Connect the USB device to the USB port.
3
Press HOME, then touch [USB].
Playback starts.
To remove the device
Turn the unit off or turn the ignition switch to the
ACC off position, then remove the USB device.
Playing a BLUETOOTH Device
You can play contents on a connected device that
supports BLUETOOTH A2DP (Advanced Audio
Distribution Profile).
1
Make a BLUETOOTH connection with the
audio device (page 8).
2
Press HOME, then touch [BT Audio].
3
Operate the audio device to start playback.
Notes
• Depending on the audio device, information such as title,
track number/time, and playback status may not be
displayed on this unit.
• Even if the source is changed on this unit, playback of the
audio device does not stop.
To match the volume level of the BLUETOOTH
device to other sources
You can reduce the volume level differences
between this unit and the BLUETOOTH device:
During playback, touch
Level]. Adjust the volume level between [-6] and
[+6].
, then touch [Input
Publicité
