Publicité
WARNING
Disconnect the electrical supply before servicing or cleaning the unit. Failure to do
so could result in electrical shock or personal injury from cleaner suddenly
starting.
Latch
Taquets
Broche
Locking
Tab
Loquet de
sûreté
Guía de
cierre
Lower Plate
Plaque inféreure
Base inferior
Latch
Taquets
Broche
Locking
Tab
Loquet de
sûreté
Guía de
cierre
Electrical Shock or Personal Injury Hazard
Removing and Installing Lower Plate
Locking
Tab
Loquet de
sûreté
Guía de
cierre
Fig. 1
Fig. 2
Tabs
Languettes
Lengüetas
Locking
Tab
Loquet de
sûreté
Guía de
cierre
Fig. 3
Before servicing any parts,
disconnect vacuum from electrical
outlet.
Always place paper under nozzle
whenever lower plate is removed to
protect floor.
Place body in upright position and
turn vacuum over to expose lower
plate.
Release lower plate by pressing two
(2) latches and two (2) locking tabs
inward as shown. (Fig. 1)
Remove lower plate and remove any
residue that may exist in belt area.
Reinstall lower plate by hooking front
end of lower plate into slots on front
of nozzle housing. (Fig. 2)
Rotate lower plate until locking tabs
snap into place then push the two (2)
latches outward. (Fig. 3)
- 42 -
Publicité
