AIRLUX ATI320MC Manuel D'utilisation Et D'entretien page 24

COOKING ADVICES
Pan quality
Adapted materials:
Not adapted materials: aluminium and stainless-steel without ferromagnetic bottom, cupper,
The manufacturers specify if their products are compatible induction.
To check if pans are compatibles:
• Put a little water in a pan placed on an induction heating zone set at level [ 9]. This water
must heat in a few seconds.
• A magnet stucks on the bottom of the pan.
Certain pans can make noise when they are placed on an induction cooking zone. This noise
doesn't mean any failure on the appliance and doesn't influence the cooking operating.
steel, enamelled steel, cast iron, ferromagnetic stainless-steel,
aluminium with ferromagnetic bottom.
brass, glass, ceramic, porcelain.
24