Installing The Glass Sweep And Weather Stripping - Petsafe Deluxe Patio Panel Manuel D'installation

Step

Installing the Glass Sweep and Weather Stripping

3
Patio door shown here slightly open
Install Weather-Stripping here
Glass Sweep
The Glass Sweep should be installed onto the BACK EDGE
of your sliding glass door to form a seal between the sliding
glass door and the stationary glass door.
1. Clean the back edge of your sliding glass door.
2. Position the Glass Sweep at the top of the door with the
fl exible part touching the glass of the stationary door.
3. Carefully peel the backing and press the Glass Sweep in
place as you move down to the bottom of the door.
4. Trim any excess with scissors.
Deluxe Patio Panel
Install Glass Sweep here
www.petsafe.net 5