Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Repeat and shuffle play
1
During playback, press (1) (REP) on
the card remote commander or (SHUF)
on the unit repeatedly until the desired
setting appears.
Select
Repeat Track
Repeat Album
Repeat Podcast
Repeat Artist
Repeat Playlist
Repeat Genre
Shuffle Album
Shuffle Podcast
Shuffle Artist
Shuffle Playlist
Shuffle Genre
Shuffle Device
To return to normal play mode, select "Repeat
off" or "Shuffle off."
After about 3 seconds, the setting is complete.
Operating an iPod directly
— Passenger control
You can operate an iPod connected to the dock
connector directly.
1
During playback, press and hold
(MODE).
"Mode iPod" appears and you will be able to
operate the iPod directly.
To exit the passenger control
Press and hold (MODE).
Then "Mode Audio" will appear and the play
mode will change to "Resuming."
Notes
• The volume can be adjusted only by the unit.
• If this mode is canceled, the repeat setting will be
turned off.
18
To play
track repeatedly.
album repeatedly.
podcast repeatedly.
artist repeatedly.
playlist repeatedly.
genre repeatedly.
album in random order.
podcast in random order.
artist in random order.
playlist in random order.
genre in random order.
device in random order.
Other functions
Changing the sound settings
Adjusting the sound
characteristics
1
Press the multi way encoder.
2
Rotate the multi way encoder until the
desired menu item appears, then
press it.
3
Use the multi way encoder to select
the setting, then press it.
4
Press
(BACK).
The setting is complete and the display
returns to normal play/reception mode.
The following items can be set:
The operation of the multi way encoder will
differ depending on the items.
: Push the multi way encoder up/down
: Push the multi way encoder left/right
: Rotate the multi way encoder
EQ3 Parametric Preset (
Selects an equalizer curve from 7 music types.
EQ3 Parametric Tune*
Custom equalizer settings. See "Customizing
the equalizer curve — EQ3 Parametric Tune"
Subwoofer Tune & LPF
or press (MODE))
Phase (
,
Selects the phase: "Normal," "Reverse."
FREQ (
)
Selects the subwoofer cut-off frequency:
"80Hz," "100Hz," "120Hz," "140Hz," "160Hz,"
"off."
Level (
)
Adjusts the subwoofer volume: "+10 dB" –
"0 dB" – "–10 dB."
("– ∞" is displayed at the lowest setting.)
HPF & Speaker Select
Speaker (
)
Selects the Speaker: "All," "Front", or "Rear."
FREQ (
)
Selects the cut-off frequency: "off," "80Hz,"
"100Hz," "120Hz," "140Hz," "160Hz."
DM+ Advanced*
2
(
Improves digitally compressed sound, such as
MP3.
To activate the DM+ Advanced function, set
"on." To cancel, set "off."
or
)
1
or
)
Publicité
Chapitres
Table des Matières
Dépannage
