Publicité
Les langues disponibles
Les langues disponibles
en Troubleshooting
Rotate the old odour filters
▶
from the holder .
2
1
Troubleshooting
9 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
9.1 Malfunctions
Fault
The appliance is not
working.
The LED lighting
does not work.
9.2 Replacing the LED lights
WARNING ‒ Risk of electric shock!
When changing the bulb, the bulb socket contacts are
live.
Before replacing the bulb, unplug the appliance
▶
from the mains or switch off the circuit breaker in
the fuse box.
WARNING ‒ Risk of injury!
The light emitted by LED lights is very dazzling, and
can damage the eyes (risk group 1).
Do not look directly into the switched-on LED lights
▶
for longer than 100 seconds.
8
and remove them
2
1
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker is faulty.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your room or other appliances are working.
▶
The LED lamp is defective.
→ "Replacing the LED lights", Page 8
▶
Fitting odour filters
Push the new odour filters onto the holder
1.
tate .
1
2
Install the grease filters.
2.
→ "Fitting grease filters", Page 7
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
Note:
Only use bulbs of the same type and wattage.
1.
Disconnect the appliance from the power supply.
Remove the grease filters.
2.
→ "Removing the grease filter", Page 7
and ro-
1
2
Publicité
