Before Using For The First Time; Perform The Initial Start-Up; Fill The Water Tank; Fill Coffee Bean Container - Siemens TQ505DF Série Manuel D'utilisation

Accessories
Adapter for milk contain-
ers

Before using for the first time

7 Before using for the
first time
Prepare the appliance for use.
Before using for the first time
7.1 Perform the initial start-up
After connecting the appliance to
▶
the power supply, configure the
settings for initial start-up.
Note: The automatic display for se-
lection of the language and water
hardness only appears when the ap-
pliance is switched on for the first
time.
Tip: You can change the settings at
any time.
→ "Basic settings", Page 59
7.2 Fill the water tank
Fill the water tank each day with
fresh, cold, non-carbonated water.
Open the lid.
1.
Remove the water tank using the
2.
recessed grip.
Rinse the water tank.
3.
Fill the water tank up to the "max"
4.
mark.
Insert the water tank into the
5.
holder, keeping it straight.
Close the lid.
6.
Retail
TZ50001
7.3 Fill coffee bean container
ATTENTION!
Unsuitable beans can block up the
grinder.
▶
▶
▶
▶
▶
1.
2.
3.
Tip: To keep the coffee beans at
their best, store them in a sealed
container in a cool place.
You can keep the coffee beans in the
bean container for a number of days
without them losing their aroma.
7.4 Setting the language
1.
a The display will show the language
2.
3.
Before using for the first time en
Customer service
17004535
Only use pure, roasted bean mixes
that are suitable for use in fully
automatic coffee or espresso ma-
chines.
Do not use glazed coffee beans.
Do not use caramelised coffee
beans.
Do not use coffee beans that have
been treated with additives con-
taining sugar.
Do not add ground coffee.
Open the lid.
Fill with the coffee beans.
The appliance will adjust to the
coffee beans with the next dis-
pensing process.
Close the lid.
Press to switch on the appli-
ance.
that is preset.
Press or
shows the desired language.
Press ⁠ .
until the display
51