Teka SL P60 4G Mode D'emploi page 50

TYPE OF HOT PLATE
Gas hot plate
Mixed hot plate with 1 electrical
plate (1,50 kW)
ATTENTION!!!
If the power supply cable is replaced, the installer should leave the ground wire longer than the phase
conductors (fig. 19) and comply with the recommendations given in paragraph 9.
POWER RATINGS OF THE ELECTRICAL COMPONENTS
TYPE
Rapid plate with 7 positions
SERVICING
CABLE TYPES AND SECTIONS
TYPE OF CABLE
H05 RR-F
H05 RR-F
DIAMETER (mm)
145
FIG: 19
48
SINGLE-PHASE POWER
SUPPLY
Section 3 x 0,75 mm
2
Section 3 x 1 mm
POWER RATING (kW)
1,50
2