SOUNDMASTER IR3500SW Mode D'emploi page 23

1. Press and slide the back cover to open the battery compartment of the remote control.
2. Insert two AAA size batteries. Make sure the (+) and (-) ends of the batteries match
the (+) and (-) ends indicated in the battery compartment.
3. Close the battery compartment cover.
Connect the unit to a suitable power source using the power supply provided. After showing a
starting screen, it will enter the last used listening mode. When the unit is started for the first
time, the setup wizard will be launched automatically.
Make sure you have setup the wireless network and you have the WEP, WPA or WPA2 security
password to activate the connection.
You may also use the WPS (WiFi Protected Setup) function for easy pairing between the
network device and IR3500. Check if the light indicators on the network device are in
appropriate status.
Under the main menu, you can select the following modes:
Internet Radio, Podcasts, Spotify, DAB, FM, USB, Bluetooth®,
Audio-In, Sleep and Alarm.
At the first time operation, system asks if you want to start the Setup
Wizard. The Setup wizard guides you through the basic setup parameters
for Time/Date and Network connection. To change any settings later all
setting functions are accessible from the Settings Menu.
Note: If the setup wizard is terminated prematurely without a network
setup, the device generates its own WiFi access so that the device can
be configured using the UNDOK APP.
Network connection indicator:
= Network connection established.
= Network connection not established.
1. Language
Select the desired menu language.
2. Product privacy policy
So that the installation can continue, please confirm the privacy policy with the
"NAVIGATE / OK" button.
Further information are available under
OPERATION YOUR REMOTE CONTROL
GETTING STARTED / SET UP
GET THE NETWORK ENVIRONMENT READY
SYSTEM SETTINGS
MAIN MENU
www.frontiersmart.com/privacy
4
IR3500 / English Instruction Manual