2. Press the " " or " " button to adjust the hour setting and press
the "TIME SET" button to confirm. The minute flash in the display.
3. Press the " " or " " button to adjust the minute setting and press
the "TIME SET" button to confirm. The display change to the time
format.
4. Press the " " or " " button to adjust the time format (24Hr or
12Hr) and press the "TIME SET" button to confirm.
5. Now the time is set.
You can store up to 10 radio stations!
Press the "RADIO ON" button to turn on the unit in radio mode.
1.
The display show "ON" and after a few seconds the radio
frequency.
Note: After a few seconds, the unit shows the clock in the display.
2. Press and hold the " " or " " button to start the automatically
search. The radio stop at the next available radio station.
3. Press the " " or " " button shortly to manually tune the radio in
100kHz steps.
4. During radio mode, press the "RADIO ON" button to show the
currently tuned radio frequency.
5. To switch off the radio, press the "RADIO OFF" button.
Store preset station
1. Search the desired radio station
2. Press and hold the "MEMORY RADIO" button until the preset
station number flash in the display.
3. While the display is flashing, select with the " " or " " button
the desired preset station number and press the "MEMORY
RADIO" button to confirm.
4. To store further radio stations, repeat the steps 1-3.
Recall preset station
Press repeatedly the "MEMORY RADIO" button to select the desired preset station number.
1. In off mode, press the "ALARM SET" button to enter the alarm 1
setting. The hour of alarm 1 flash in the display.
2. Press the " " or " " button to adjust the hour setting and press
the "ALARM SET" button to confirm. The minute flash.
FM
ALARM
3
UR580 / English Instruction Manual