Domo DO91333C Mode D'emploi page 56

2. Disconnect the connector from the cables.
3. Loosen the screws of the upper hinge and remove the hinge. Pull the electrical connector through
the hole of the hinge.
4. Lift the upper door and place it on a padded surface to prevent it from being scratched.
5. Remove the screw hole cover plate on the top left side of the refrigerator. Attach the right screw
hole cover plate that can be found in the accessory bag provided.
6. Remove the cover plate ① from the top left side of the door. Take the electrical connector ② out.
Remove the other cover plate ③ from the top right side of the door and put the other electrical
connector ④ into the top right side of the door. Fix this second cover plate ③ onto the top left side
of the door. Put the first cover plate ① onto the top right side of the door.
7. Loosen screw ③ and take down the stop block ② and door stopper ① from the bottom right side.
Install the replacement door stopper, that can be found in the accessory bag provided, and the stop
block ② on the left side with the screw ③.
8. Unscrew the bolts of the middle hinge and remove the middle hinge. Remove the lower door and
place it on a soft surface to avoid scratching it.
56
DO91333C