Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1English1
CAUTION
(to prevent injury or damage)
The entrepreneur dealing with concrete vibrator has to manage working hours,
and has to strive for a workers vibration obstacle prevention.
Refer to the Vibration total value for the details about vibration of vibrator.
Observe the relevant legal instructions and guidelines of the country that use the
vibrator.
The head assembly of this product is cooled when placed in ready-mixed
concrete. Thus, do not use it outside the ready-mixed concrete (i.e. in the air).
The head assembly becomes hot during operation. After use, be careful not to
touch it. There is a risk of being burned.
Do not swing around with the vibrator body.
There is a possibility that this could cause injury or damage to people or objects
nearby.
Check that the vibrator is not damaged, cracked, or deformed when dropped or
hit the vibrator. Injury or electric shock may result.
Unplug the charger from the outlet except during charging.
Fire, heat, or electric shock may result.
Before starting operation, make sure that the motor and vibrator are properly
set.
If not, flexible shafts may swing around and it may cause damage (C28F type).
Charge the battery periodically. If you do not use the product for a long time,
the battery may be damaged.
Charge the battery fully once every half year. When storing for a long time, be
sure to charge completely before store.
When recharging with an extension cord, use 1.25mm2 or more (AWG16)
extension cord.
Use the extension cord of the rubber insulated cable for outdoor use. Fire or
electric shock may result if an extension cord with incorrect wiring or damaged
or disconnected wiring is used.
The head assembly becomes hot during operation. After use, be careful not
to touch it
. There is a risk of being burned.
SERVICE
English
-7
Publicité
Table des Matières
