Accessories - DUROFIX RZ6008 Série Mode D'emploi

and pressing
the switch
immediately
will not
restart, but
the above
phenomenon
can be
reproduced
after the
battery is re-
plugged
Over-current
protection
(stall
protection)
Lamp OFF
Not chargeable
Lamp ON
Short operating time even after
charging
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one vibrator may become hazardous when used on
another vibrator.
Recommended accessories for use with your vibrator are available at extra cost from
your local service center.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustments should be performed by certified service centers or other qualified
service organizations, always using identical replacement parts.
1English1
Over heat protection in
motor
Bad bearings or vibration
assembly
(Rough, Worn)
Charger error
Abnormal battery
temperature
Battery abnormality
End of a product's life

ACCESSORIES

English -16
Tool stop and cooling
Replace the bearing or
vibration assembly
Replace charger.
Wait until the
temperature drops while
hot.
(Wait until temperature
rises while cold.)
Replace the battery.
Replace the battery.