DUROFIX RZ6008 Série Mode D'emploi page 13

Head assembly
■ 28FP / 28FPL
1. Insert the vibrator assembly shaft joint into the motor assembly.
2. Screw the hose gland of the vibrator assembly into the motor.
3. Hit the hose gland with a hammer for installation.
Hose
■ KCA
3. Screw the spring assembly onto the motor.
4. Insert the spring assembly (female) and the vibrator assembly (male), and
then, secure the vibrator assembly with 4-M5 bolts.
Head assembly
1English1
Spring
assembly
Bolt M5
Motor assembly
Shaft joint
Hose gland
Motor assembly
Spring
assembly
Motor assembly
Bolt M5
English -12