Auto Power Off - Megger TPT320 Mode D'emploi

TPT320 Feature
GS38
UK tip
Hand
barrier
Remote
probe
Operating instructions
Auto-power-on / switching on
The tester switches on when it detects continuity,
an AC or DC voltage above approx. 10 V or a
live phase on L2 (single pole test). It can also be
switched on with the torch light button.
Auto-power off
Tester is automatically powered off after 5 sec
when there is no signal detected by the probes.
The torch light switches off after approx. 10 sec.
1.2 metre probe lead
Euro tip
LED torch
Battery
cap
Display
Hand
barrier
Torch
button