Troubleshooting
Problem
Leaks water.
Has odours.
If a problem persists, contact a service center. The number of the service center is on the label attached to
the product.
58
English
A2-WW6900_WASHER-MD_SimpleUX_03645H-00_EN.indd 58
• Make sure the door is properly closed.
• Make sure all hose connections are tight.
• Make sure the end of the drain hose is correctly inserted and secured to the
drain system.
• Avoid overloading.
• Use high efficiency (HE) detergent to prevent oversudsing.
• Check the drain hose.
-
Make sure the end of the drain hose is not placed on the floor.
-
Make sure the drain hose is not clogged.
• Excessive suds collect in recesses and can cause foul odours.
• Run cleansing cycles to sanitise periodically.
• Clean the door seal (diaphragm).
• Dry the washer interior after a cycle has finished.
Action
2022/6/9 9:48:54