Publicité
Les langues disponibles
Les langues disponibles
Installation
STEP 3 Adjust the levelling feet
CAUTION
Make sure all the levelling feet are seating on the floor surface to avoid the washer from moving or
generating noise due to vibration. Then, check if the washer is rocking. If the washer is not rocking, tighten
the nuts.
24
English
A2-WW6900_WASHER-MD_SimpleUX_03645H-00_EN.indd 24
1. Gently slide the washer into position. Excessive force
may damage the levelling feet.
2. Level the washer by manually adjusting the levelling
feet.
3. When levelling is complete, tighten the nuts using
the spanner.
2022/6/9 9:48:46
Publicité
