Door diaphragm
CAUTION
Wear rubber gloves when cleaning for prolonged periods.
Refer to the bleach manufacturer's instructions for proper use.
Recovery from freezing
The washer may freeze when it drops below 0 °C.
1. Turn off the washer, and unplug the power cord.
2. Pour warm water over the water tap to loosen the water hose.
3. Disconnect the water hose, and soak it in warm water.
4. Pour warm water into the drum and leave it for about 10 minutes.
5. Reconnect the water hose to the water tap.
NOTE
If the washer still doesn't operate normally, repeat the above steps until it operates normally.
A2-WW6900_WASHER-MD_SimpleUX_03645H-00_EN.indd 53
1. Open the washer door and remove any clothing or
items from the washer.
2. Check if there are any foreign substances on the
grey Diaphragm between the lid and the drum.
To check this, turn the Diaphragm out.
3. If there are any foreign substances, remove them.
4. If you find stained areas, wipe them down using the
procedure below:
a) Carefully combine ¾ cup (177 mL) of liquid
chlorine bleach with 1 gal. (3.8 L) of warm tap
water.
b) Wipe the Diaphragm area with the dilute
solution using a damp cloth.
c) Let stand 5 minutes.
d) Wipe down the area thoroughly with a dry cloth
and let the washer interior air dry with the door
open.
English 53
2022/6/9 9:48:53