Publicité
Les langues disponibles
Les langues disponibles
Operations
Special features
Smart control (applicable models only)
You can connect to the SmartThings app and control your washer remotely.
Connecting your washer
1. Download and open the SmartThings app on your smartphone or tablet (Android & iOS).
2. Tap
to turn on the washer.
3. Tap and hold Smart Control.
a. The washer enters AP mode and connects to your smartphone or tablet.
b. Tap Smart Control to authenticate your washer.
c. Once the authentication process is complete, your washer is successfully connected to the app.
-
You can use various features available in the SmartThings app.
NOTE
• If your washer fails to connect with the SmartThings app, try again.
• Check your router if you experience any Internet connection problem after connecting your washer with
the SmartThings app.
• If the Wi-Fi is off, tap and hold Options for 3 seconds to enter the System functions menu, and select
Wi-Fi to turn it on.
• Turning the washer's Wi-Fi on allows you connect to the washer via SmartThings app on your
smartphone or tablet, regardless of the power status of the washer. However, the washer appears
offline on the SmartThings app if the washer's Wi-Fi is off.
• Close the door before starting the Smart Control function.
• If you use your washer for a while without connecting it to the SmartThings app, a pop-up message
about Smart Control will show for 3 seconds.
• If the washer's Wi-Fi is not connected to an AP (access point), the Wi-Fi will turn off when you turn of the
power.
Stay Connect
Set up the Stay Connect function in your SmartThings app to keep Smart Control turned on at the end of a
cycle. Your washer stays connected to the app so you can send additional instructions, whether you are at
home or away.
1. If you turn on the Stay Connect function on the SmartThings app, the washer will stay in standby power
saving mode after completing a cycle.
-
The Stay Connect function will remain active for up to 7 days if the door remains closed.
2. When the Stay Connect function is active, the Smart Control, Door Lock, and Wi-Fi icons are illuminated
on your washer display.
3. You can conveniently control your washer, adding rinse, spin or dry cycles using the SmartThings app.
NOTE
• The washer switches to standby power saving mode when operation is paused even if the machine is not
connected to the SmartThings app.
• In some circumstances, only the Door Lock icon may be illuminated.
46
English
A2-WW6900_WASHER-MD_SimpleUX_03645H-00_EN.indd 46
2022/6/9 9:48:51
Publicité
