Brother P-Touch 2480 Mode D'emploi page 61

Using database data in a Label Type mode
This function enables you to select the range of database fields to print.
Press a, and then select the Label Type mode as described in chapter 2.
1
Press g, then a. The message "CLEAR TEXT & PRINT DATABASE?"
2
appears.
Press n.
3
Press l or r until RECORD NO. is displayed, and then specify the desired
4
range of records.
Press l or r until FIELD NO. is displayed, and then specify the desired
5
range of record fields.
Press n (or p). CONFIRM appears in the Print Option menu.
6
Press n (or p) to begin printing the labels using the specified range of
7
records.
☞ If label text has been typed in, you will be asked to choose either TEXT PRINT or
DATA PRINT when
PRINT. If TEXT PRINT is selected, the special printing functions for printing
multiple copies of labels (refer to page 31), printing multiple copies with incremental
characters (refer to page 31), printing a range of text blocks (refer to page 33), or
printing the label text as a mirror image (refer to page 33) are available.
☞ To specify settings for additional Print Option functions, instead of continuing with
7
step , press
menu, and then press
page 31 and
☞ While trying to print a large amount of data at one time, some outputted labels may be
blank. For example, when printing 50 records, the maximum number of characters
that can be printed at one time is limited to approximately 200.
54
g, then a
u d
or until CONTINUE is displayed in the Print Option
n
. (Refer to
Printing mirrored labels
is pressed. At this time, select DATA
Printing multiple copies of a label
on page 33.)
on