Publicité
Les langues disponibles
Les langues disponibles
Error Message List
Error Message
1 BLOCK LIMIT!
4 DIGITS
MINIMUM!
50 LINE LIMIT
REACHED!
7 LINE LIMIT!
BUFFER EMPTY!
BUFFER FULL!
CASSETTE
CHANGED!
58
Cause
• This message appears if you
try to use the Numbering
function when multiple
blocks of text have been
entered with the PANEL
Label Type mode selected.
• This message appears if less
than the minimum four
digits are entered as the bar
code data.
• This message appears if 50
text blocks have already
been entered when you press
g
n
, then
• This message appears if 7
lines have already been
entered in a text block when
n
you press
.
• This message appears if you
delete
, causing the
number of lines in a block to
exceed the 7-line limit.
• This message appears if no
text has been typed in when
you try to print or Preview
function.
• This message appears if you
try to add a character, a
space, a new line, a new
block, a symbol, an accented
character or a bar code after
the maximum number of
characters has already been
entered.
• This message appears if the
tape cassette was changed
while the P-touch paused for
the tape to be cut.
• Cancel the Numbering
function.
• Limit the number of text
blocks to 1.
• Enter a minimum of four
digits before pressing
n
• Limit the number of text
blocks to 50.
.
• Limit the number of lines in
a text block to 7.
• Adjust the number of lines
so that the block will not
have more than 7 lines.
• Type in some text before
trying to perform any of
these operations.
• Delete some existing text
before trying to add any
more.
• Change the tape cassette
back again.
Solution
.
Publicité
