Brother P-Touch 2480 Mode D'emploi page 30

PERSONAL symbol category becomes full
☞ Once the
overwrite older ones unless the Symbol Save function is set to OFF
Specifying if the PERSONAL symbol category is continually updated
Formatting the Label
Specifying a label length
The length of the label can be specified as follows.
Press g, then A.
1
Press l or r until LENGTH is displayed.
2
Press u or d until the desired label length is
3
displayed (or use the number keys to type in the
desired setting).
Press n.
4
Specifying a margin size
The size of the margins for the left and right sides of the text can be specified.
Press g, then A.
1
Press l or r until MARGIN is displayed.
2
Press u or d until the desired margin
3
setting is displayed (or use the number keys to
margine type in the desired setting).
Press n.
4
, newly selected symbols will
.
(Refer to
on page 39
6 to 999 mm
2 to 99 mm
.
)
2 to 99 mm
23