Publicité
Les langues disponibles
Les langues disponibles
5.
When the elastic has the correct
tension the flap can be closed. Then
reattach the rubber bands to the loop
connections.
EN
Figure 21 - Close the flap.
3.3 After use
3.3.1 Cleaning
•
Clean the rain cover with a damp
cloth and/or a soft brush. Do not use
cleaning products containing soap or
chemicals.
•
Ensure that the reflective strip on the
rain cover is visible at all times. Clean
this with a damp cloth if necessary.
•
For cleaning the windows, we
recommend using alcohol 70%.
3.3.2 Disassembly
•
Open the press connectors at the front
and rear.
•
Detach the Velcro strip from the frame.
•
Remove the rain cover and rod
assembly from the Lovens Explorer.
•
Place the rain cover on a clean surface.
•
Remove the rods from the fabric part
of the rain cover.
•
Fold both flaps inward and carefully roll
up the fabric.
16
•
Remove the angled rods from the
adapters.
•
Unscrew the adapters from the bike.
3.3.3 Storage
•
When storing the rain cover, ensure
that the windows of the rain cover are
not folded more than necessary, as this
may damage the windows.
•
Store the dry rain cover in a dry place.
•
To prevent damage or sagging, do not
place heavy objects on the rain cover.
•
To prevent accidents, we advise
regularly checking the rain cover for
wear.
3.3.4 Maintenance
•
If the rubber bands at the back are
worn out or broken, it is possible to
replace them ⓬. To do this, open the
Velcro strip and remove the elastic.
Insert the new elastic and close the
Velcro strip again.
Figure 22 - Replacing elastic.
Publicité
