Publicité
Les langues disponibles
Les langues disponibles
2.
Place the rod assemblies
opening provided for this purpose in
the fabric, with the straight rods first.
Figure 2 - Placing rod assembly in rain cover.
3.
Attach the two adapters
Use the M4x20 bolt
on the bottom and the M6x20 bolt
⓫
and M6 washer
❿
Figure 3 - Attaching the adapters to the frame.
in the
❷
to the bike.
❺
and M4 washer
❸
❹
on the side.
4.
Screw the press connectors
front of the Lovens Explorer. Fix these
in place using a 9 mm open-ended
wrench.
Figure 4 - Attaching the screw with press connector.
5.
Insert the countersunk screw
the loop connector
Figure 5 - Placing countersunk screw in loop connector.
6.
Turn the screw with loop connectors
into the rear of the Lovens Explorer.
Figure 6 - Attaching the screw with loop connector.
into the
❻
into
❽
.
❼
11
EN
Publicité
