Publicité
Les langues disponibles
Les langues disponibles
1. Warranty
•
Read the user manual of the Lovens
Explorer for the general terms and
EN
conditions and safety instructions for
use of the Lovens Explorer.
•
Lovens offers a two-year warranty
against manufacturing and/or
production defects.
•
The warranty requires the use of only
original parts. If other parts are used,
Lovens cannot be held liable for any
damage.
•
Ensure that the rain cover is properly
fastened as described in the user
manual. Incorrect attachment may
cause damage to the rain cover and/or
hazardous situations.
•
Modifying the rain cover yourself is not
permitted. If this is done, functionality
can change and the warranty will be
voided.
•
The warranty is valid from the moment
at which the dealer sells the rain
cover to the consumer. This means
it is important to keep your proof of
purchase in a safe place.
•
This rain cover is only suitable for the
Lovens Explorer from Lovens.
2. Requirements
2.1 Own tools
Certain tools are required to install the rain
cover. Ensure that you have the following
tools:
•
Open-ended wrench 9 mm
•
Hex wrench 3
•
Hex wrench 4
10
2.2 Product parts
1
2
3
4
5
6
7
8
9
10
11
Figure 1 - Lovens Explorer rain cover main parts.
❶
❼
Rain cover
Loop connector (2x)
❷
❽
Set of rods (2x)
Countersunk screw (2x)
❸
❾
M4x20 bolt (2x)
Cap for loop connector (2x)
❹
❿
M6x20 bolt (2x)
M6 washer (2x)
❺
⓫
Adapter (2x)
M4 washer (2x)
❻
⓬
Bolt with
Additional elastic band (2x)
press connector (2x)
3. Instructions
3.1 Installation instructions
1.
Place the fabric part of the rain
cover
on a clean surface to avoid
❶
scratching the fabric and windows.
12
Publicité
