LOVENS EXPLORER Manuel De L'utilisateur page 15

3.2.4 The elastic
• The premium raincover comes with
an additional elastic band. Optionally,
the elastic band can be replaced.
To tension the raincover easily, it is
possible to adjust the length of the
elastic.
1. Detach the rubber bands from the
loop connections. You can loosen and
tighten the elastic by pulling the tabs
on the elastic.
Figure 17 - Removing the rubber bands from the loop
connection.
2. There is a flap on the inside of the
raincover (left and right rear). Open the
flap to access the ends of the rubber
bands.
Figure 18 - Opening the flap
3. Detach the end of the elastic from the
velcro to adjust it.
Figure 19 - Detaching elastic.
4. For a tighter elastic, place the end of
the elastic upward. Place the elastic
down for a looser elastic.
Figure 20 - Adjusting tension of elastic.
EN
15