Publicité
Les langues disponibles
Les langues disponibles
2. Switching the device off
- Let go of the switch
- Hold the device firmly until the tool stops.
3. Interrupting or finishing work
- Attach the blade guard
Working with the grass cutters
The grass cutters are used to trim hard-to-access lawn sections and edges that
cannot be trimmed with lawn mowers or grass trimmers.
Working with shrub cutters
Always operate the blade pointing away from your body, never towards it.
Search hedges and bushes before cutting for concealed objects, such as wire
fences, and remove these if necessary.
Remove thick branches beforehand with pruning shears.
You can achieve the best cutting performance if you use the shrub blade so that
the blade's teeth are directed towards the hedge at an angle of approx. 15°.
With the double-sided, opposing blade, you can cut in both directions with the
shrub blade.
Inspection
CAUTION!
Risk of injury from sharp blades
- Wear protective gloves.
Before each use check that:
- the device is undamaged,
- the controls are not damaged,
- the accessories are in perfect condition,
- the vents are clear and clean.
Do not operate a damaged device or accessory. Instead, get it inspected and
repaired by the manufacturer or their customer service or a similarly qualified
person.
Maintenance
Clean and grease the moving parts in the drive section as needed.
Inspect the device regularly (see section "Inspection").
.
11
7
/
3
.
Operation
67
Publicité
