Publicité
Les langues disponibles
Les langues disponibles
Operation
4. Inserting a tool
- Insert the tool with the rear
retaining collar into the device
- Snap the tool into the click system
by pressing on the tool base plate
12
You do not have to observe the position of the eccentric drive when
changing tools. When switching on, the gearbox eccentric moves
independently into the corresponding recess on the tool.
The device is ready for use again.
Switching on/switching off the device
CAUTION!
Risk of injury!
- Remove the blade guard before each use and replace it
after use and during interruptions.
- Firmly hold the device until the tool stops.
1. Switching the device on
- Take the device by the handle.
- Remove the blade guard
- Firmly grip the handle and slide the
switch lock
forward with your
8
thumb.
- Now press the switch
index finger.
- Once the device starts, you can let
go of the switch lock.
66
4
5
/
.
7
3
with your
11
12
1
8
11
Publicité
