Publicité
Les langues disponibles
Les langues disponibles
Safety
- Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites accidents.
- Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result
in personal injury.
- Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
- Dress properly. Do not wear loose clothing or jewellery. Keep your hair
and clothing away from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
- Do not let familiarity gained from frequent use of tools allow you to
become complacent and ignore tool safety principles. A careless action
can cause severe injury within a fraction of a second.
Using and handling the power tool
- Do not overload the power tool. Use the appropriate power tool for
your work. The right power tool allows you to work better and safer in the
specified power range.
- Do not use any power tool that has a defective switch. Power tools that
can no longer be switched on or off are dangerous and must be repaired.
- Disconnect the plug from the socket and/or remove any removable
batteries before making adjustments to the device, changing any insert
tool parts, or putting the power tool away. This precaution helps prevent
unintentional starting of the power tool.
- Keep power tools out of the reach of children when not in use.
Whoever is not familiar with the power tool or who has not read these
instructions should not be allowed to use it. Power tools are dangerous if
used by inexperienced persons.
- Power tools and insert tools must be subject to careful maintenance.
Check whether moving parts function properly without jamming, and
whether parts are broken or damaged to such an extent that they
impair the functions of the power tool. Have damaged parts repaired
before using the power tool. Many accidents happen due to poorly
maintained power tools.
- Keep cutting tools sharp and clean. Carefully maintained cutting tools with
sharp blades tend to jam less and are easier to guide.
- Use power tools, insert tools, insert tool parts, etc. according to these
instructions. While doing so, take into account the working conditions
58
Publicité
