Télécharger Imprimer la page

Ribimex Ribiland PRLUMSOL3/P50 Manuel D'instructions Et D'utilisation page 17

Publicité

Les langues disponibles

Les langues disponibles

IV. GETTING STARTED
Before any intervention on product, ensure that switch in set to "OFF" position.
4.1- Unpacking
Remove product from its packaging. Check that product and accessories are not damaged.
4.2- Assembly
Warning! Adjust the inclination so that the luminous flux does not disturb people.
- Select mounting location.
- It is recommended to mount the lamp permanently on a sturdy support where the solar panel can easily be
reached by direct sunlight.
Note : screwdriver and pencil not included.
Step
Mounting step description
on hard surface
1
Use the mounting base as
template to mark the holes
to be drilled on the ground
(or on the mounting
surface).
2
Drill the holes on the marks
placed on the ground using
a drill with bit of
appropriate diameter.
Insert a plastic wall plug
into each hole.
3
Secure the mounting base to
the floor using the screws
provided.
Illustration for round shape
column
Illustration for rectangular shape
column
Page 17 / 21

Publicité

loading