EXTRA OPTIONS
Note:
If you used an extra option with the previous program, this option will remain active for the new program.
An extra option can be selected by browsing with the option button.
1. Press once to enable the energy save function.
The appliance operates at a lower temperature to save energy and will automatically open the door after the
program has ended to increase the drying efficiency.
2. Press twice to enable the extra dry function.
An extra drying step is added to the program in order to obtain drier dishes.
3. Press three times to enable the extra silent function.
The water pressure will be decreased, so the result is a more silent wash.
CHANGING THE BUZZER SOUND LEVEL
To change the sound level of the buzzer, follow the below steps:
1. Open the door of the appliance.
2. Push and hold the Timer and Options button simultaneously for 3 seconds.
3. When the sound setting is recognized, the buzzer gives a long sound and the display shows the last set level,
from S0 to S3.
Note: the factory setting is S3.
4. To decrease the sound level, push the Timer button. To increase the sound level, push the Options button.
Note: level S0 means all sounds are off and level S3 is the loudest.
5. Push the on/off button to confirm the setting.
6
Cleaning and maintenance
CLEANING THE APPLIANCE
Caution:
Make sure that the appliance is off.
Note:
If you clean the appliance regularly, it will improve the service life.
1. Clean the outside of the appliance. Use a damp cloth.
2. Clean the seals of the door. Use a soft cloth.
3. Clean the inside of the appliance in case of high contamination:
a. Fill the detergent reservoir with a special cleaning agent for dishwashers.
b. Select a program with a high temperature.
c. Start the program.
CLEANING THE FILTERS
The filter system of the appliance consists of three components: the main filter, the micro filter and the sieve.
Clean the filters weekly.
Warning:
Do not use the appliance without the filter system.
48
•
English