Note:
Fill the rinse aid reservoir when the rinse aid indicator on the control panel is on.
1. Open the rinse aid reservoir (A).
2. Fill the reservoir (B) with rinse aid until the MAX level.
Caution:
Remove any spilled rinse aid immediately. Spilled rinse aid can form extreme foam which can cause
leaks.
SETTING THE LEVEL OF RINSE AID CONSUMPTION
When water stains form on your dishes after a wash cycle, you have to increase the level of rinse aid consumption.
When blue stains form on your dishes after a wash cycle, you have to decrease the level of rinse aid consumption.
Set the level of rinse aid consumption according to the information in section
Note:
As a default, the level of rinse aid consumption of the appliance is set to level 4.
1. Open the door of the appliance.
2. Switch on the appliance, and push and hold the program selector button as soon as the appliance is on.
3. Hold the program selector button until the display briefly shows rA.
4. The display shows the latest set setting of the rinse aid consumption.
5. Push the program selector button again to change the level of rinse aid consumption.
6. Push the on/off button to confirm the setting.
RINSE AID CONSUMPTION SETTINGS
Level
1
2
3
4
5
LOADING THE APPLIANCE
Correctly placing dishes into the appliance has a positive effect on the energy consumption and the washing and
drying performance of your appliance.
Manual pre-rinsing of tableware leads to increased water and energy consumption and is not recommended.
Remove any coarse food deposits from the dishes before placing the dishes into the appliance.
You can place dishes in the cutlery drawer or basket, the upper basket and the lower basket.
Caution:
Make sure that you load the appliance in such a way that the dishes do not block the upper and lower
spray arm. If the spray arms are blocked they cannot spin during washing.
Loading the cutlery drawer
The cutlery drawer is designed for loading cutlery. You can remove the cutlery drawer partly to create more space in
the upper basket or you can remove it completely for easy loading.
1. If necessary, remove the cutlery drawer from the appliance. Refer to section
44
•
English
Number of rinse aid doses that is dispensed
Rinse aid not dispensed
1 dose
2 doses
3 doses
4 doses
Rinse aid consumption settings
Display indicator
r1
r2
r3
r4
r5
Removing the cutlery drawer
(Figure 8)
(Figure 9)
.
.