Publicité
Les langues disponibles
Les langues disponibles
READ AND SAVE ALL INSTRUCTIONS FOR FUTURE REFERENCE
FUNCTIONAL DESCRIPTION
Plug the Power Supply 9HP120LT into Rupes BIGFOOT NANO Hybrid tool HR81M / HR81ML and connect it to
the socket. The Rupes BIGFOOT NANO Hybrid tool HR81M/ HR81ML is ready to work.
TECHNICAL SPECIFICATIONS
TYPE
Input Volts (VAC)
Input frequency (Hz)
Power (W)
Output Volts (VDC)
Output Amps (A)
WARNING: for technical data refer to the label of Power Supply 9HP120LT
WARNING: to reduce the risk of injury or explosion, never burn or incinerate the tool's power supply
even if it is damaged or dead. When burned, toxic fumes and materials are created.
OPERATION
WARNING: before connecting the cable to the electric socket check if the voltage of the socket
coincides with the Voltage specified on the label of Rupes BIGFOOT NANO Hybrid tool Power Supply
9HP120LT.
Voltage
100-130V
220-250V
MAINTENANCE AND STORAGE
WARNING: to reduce the risk of injury, always unplug the Power supply before performing any
maintenance. Never disassemble the power supply, the tool or charger. Contact a Rupes service
facility for all repairs (refer to "Rupes WARRANTY").
Never immerse your power supply, tool or charger in liquid or allow a liquid to flow inside them.
Cleaning: Clean out dust and debris from power supply vents and electrical contacts by gently blowing with
compressed air; wearing appropriate dust mask taking consideration of the type of material having been worked.
Only use a mild soap solution on a damp cloth to clean the power supply, tool and charger, keeping away from
all electrical contacts. Other cleaners may contain chemicals that could cause damage to the plastic and other
insulated parts. Some of these include gasoline, turpentine, lacquer thinner, chlorinated cleaning solvents,
ammonia, and household detergents containing ammonia. Do not use flammable or combustible solvents (refer to
previous instructions) around power supply, tool and charger.
Storage: Store power supply at room temperature away from moisture. Do not store in damp locations where
corrosion of terminals may occur.
Unplug the power supply from the socket when not in use.
Repairs: The Rupes BIGFOOT NANO Hybrid tool Power Supply 9HP120LT has no serviceable parts.
FAILURE TO START
IIn a case of failure to start: check to make sure the prongs on the cord plug are making good contact in the
outlet; check if the current is present in the plug; check for blown fuses or open circuit breakers in the line.
4
Power Supply 9HP120LT
Correspondence between Voltage and plugs
100-130
50/60
60
12 ±10%
5
Plug Type
Type A
Type C (CEE 7/17)
Type G
Type I
Publicité
