Télécharger Imprimer la page

Parkside PSZ 250 A2 Instructions D'utilisation Et Consignes De Sécurité page 18

Masquer les pouces Voir aussi pour PSZ 250 A2:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
Safety information
m
WARNING!
Read all safety information,
u
instructions, diagrams and
technical specifications applied to
the product. Failure to follow the safety
information and the below instructions may
result in electric shock, fire and/or serious
injury .
Keep all the safety information and
instructions in a safe place for future
reference.
Keep children and other unauthorized
 
persons away from the product .
m
DANGER!
Risk of electric shock! Never attempt
u
to repair the product yourself . In case of
malfunction, repairs are to be conducted by
qualified personnel only .
m
DANGER!
Risk of electric shock! Turn off the
u
product and disconnect it from the power
supply before cleaning and when the
product is not in use .
m
DANGER!
Risk of injury! Improper use may result
u
in personal injury . Use the product only
as described in the user manual . Never
attempt to alter the product in any way .
m
DANGER!
Risk of injury! Never use a damaged
u
product . Disconnect the product from the
power supply and contact your retailer if
the product is damaged .
18 GB/IE
Make sure that the nominal voltage on the
 
rating plate complies with the supply voltage .
If possible, only operate the product on an
 
electrical circuit protected by a fault current
switch and a fuse of at least 10 A .
The use of extension cords is not
 
recommended . If the use of an extension cord
is necessary, it must be designed for a current
flow of at least 10 A .
Shield the power cord and power plug from
 
dust, direct sunlight, dripping and splashing
water .
Protect the power cord from damage . Do
 
not allow the power cord to hang over sharp
corners; do not crush or bend it . Keep the
power cord away from any hot surfaces and
open flames .
Do not operate the product if the power
 
cord or power plug are damaged, nor if the
product does not work or is damaged in any
way .
If the power cord is damaged, it must be
 
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard .
Do not disconnect the power plug from the
 
socket outlet by pulling on the power cord .
Special safety information for rope
hoists
Persons who intend to use the product
 
must first receive appropriate training or
instructions .
It is prohibited to move persons with the
 
product .
It is prohibited to lift loads in excess of the
 
nominal load .
Do not attempt to lift stuck or jammed loads .
 
The steel cable must be taut when lifting the
 
load .
Do not pull the loads in horizontal direction .
 
Avoid switching the product on and off
 
rapidly (inching operation) .

Publicité

loading

Ce manuel est également adapté pour:

Hg05656