Honeywell HOWARD LEIGHT SYNC Radio Mode D'emploi page 2

usi USER INSTRUCTIONS
INSTRUCTIONS FOR FITTING according to illustrations A-C:
INSTRUCTIONS FOR RADIO USE according to photo descriptions 1-7.
3. To change AM/FM frequency band press (2) once to toggle between the two frequencies.
DIGITAL DISPLAY: Preset Station Memory control 0-9 (1a)-
+ To delete a station from memory, select the memory digit number by pressing the memory button (5) until the desired number appears on the digital readout (1a),
then hold the memory button (5) for 2 seconds until you hear one beep tone. Press AM/FM button (2) once to exit memory mode.
+ FM stereo display (1e)- "ST" will display. If the stereo radio station is not stable, it will switch to mono and will not show the "ST" icon.
A FCC WARNING STATEMENT
+ Reorient or relocate the receiving antenna.
© Increase the separation between the equipment and receiver.
CANADA CLASS A(L)
2. The NAR is 25 decibels (dB).
3. The level of noise entering the ear is approximately equal to 67 dB (A).