Insignia NS-OTR16SS9 Mode D'emploi page 16

NS-OTR16SS9 REV B_20-0410_MAN_V1_EN.fm Page 16 Thursday, December 10, 2020 9:36 AM
3 Pull the louver away from the unit.
4 Open the light cover located behind the filter by removing the light cover screw, then carefully pulling up on the
front edge.
5 Remove the old light bulb, then replace with a new bulb.
•
6 Replace the microwave light cover by carefully pushing it into place.
7 Push the louver back into place and replace the louver mounting screws.
16
CAUTION
Do not use a bulb larger than 30 watts.
www.insigniaproducts.com
NS-OTR16SS9 REV B
Louver
Light cover
Light cover screw
Louver