Télécharger Imprimer la page

Insignia NS-OTR16SS9 Mode D'emploi page 10

Masquer les pouces Voir aussi pour NS-OTR16SS9:

Publicité

Les langues disponibles

Les langues disponibles

NS-OTR16SS9 REV B_20-0410_MAN_V1_EN.fm Page 10 Thursday, December 10, 2020 9:36 AM
Using your microwave
Cooking in your microwave
1 Press Cook Time, then use the number pad to enter the cooking time that you want.
2 Press Power Level, then enter the power level that you want (0-10).
LEVEL
10
9
Power
100%
90%
Display
PL 10
PL 9
3 Press Start to begin heating.
OR
For two-stage cooking, repeat steps 1-2 to program the second stage.
Setting the clock
1 In standby mode, press and hold *Clock/Timer for three seconds. The display shows "Hr 12" for 12-hour mode. If
you want to use 24-hour mode ("Hr 24"), press *Clock/Timer again.
2 Use the number pad to enter the current time (1:00–12:59), then press Start to confirm the setting.
If the microwave beeps twice, the numbers entered are not invalid.
Using the kitchen timer
1 In standby mode, press *Clock/Timer. The display shows "00:00" and "TIMER".
2 Use the number pad to enter the time (the maximum time is 99 minutes and 99 seconds), then press Start to
start the count down timer. When the time reaches 0, the buzzer rings once.
Turning sound on and off
1 Press and hold *Sound for three seconds to turn off the beep sounds when panel buttons are touched.  "OFF 1"
appears on the display momentarily.
2 Press and hold *Sound for three seconds again to turn off all beep sounds including end of cycle and timer
alerts. "OFF 2" appears on the display momentarily.
3 Press and hold *Sound for three seconds again to turn on all sounds.
Cooking quickly
1 Press Start to instantly cook something at 100% power for 30 seconds. 
2 To increase the time in 30 second increments (except Auto Cook), press +30 Sec. repeatedly. 
3 To quickly start cooking for a different time duration, enter the time in minutes and seconds (for example, for 4
minutes, 35 seconds, press 4, 3, 5) then press Start.  You can also press  Cook Time first, then enter the time and
press Start.
Cooking complete reminders
At the end of the cooking cycle, your microwave stops running and beeps twice.  If you do not remove the food
within three minutes, your microwave beeps again to remind you to remove the food. Your microwave repeats the
reminder beep every three minutes for a total of three reminder beeps.
10
Note
For example, to enter 3 minutes and 15 seconds, press 3, 1, and then 5.
8
7
6
80%
70%
60%
50%
PL 8
PL 7
PL 6
PL 5
Note
• You can check the power level during cooking by pressing Power Level. To
change it, enter a new power level (0–10).
• If "PL 0" is selected, the fan turns on but microwave cooking power will be at 0%.
You can use this level to remove an odor in the microwave.
Note
Two-stage cooking lets you program two cook times and power levels at the same
time.
www.insigniaproducts.com
NS-OTR16SS9 REV B
5
4
3
2
40%
30%
20%
PL 4
PL 3
PL 2
1
0
10%
0%
PL 1
PL 0

Publicité

loading