Meec tools 027415 Traduction Des Instructions D'origine page 53

wait until all moving parts have come to a
complete standstill before carrying out any
service or maintenance work. Follow the
instructions for maintenance below.
BLADE REPLACEMENT
WARNING!
• Turn off the robot lawnmower and wait
until all moving parts have come to a
complete standstill before replacing the
blades. Wear protective gloves when
changing the blades.
• Do not replace just one blade – always
replace all the blades at the same time.
• Screws that are damaged or worn or
cannot be tightened properly must
always be replaced with new screws. If
defective screws are not replaced with
new ones, the blades may become
unbalanced or fall off while the mower
is operating, which could cause serious
injury.
The blades have a service life of up to 2 months
when the mower is programmed for daily
mowing.
After fitting new blades, make sure that the
blade disc is able to rotate freely.
CLEANING
WARNING!
• Turn off the robot lawnmower and wait
until all moving parts have come to a
complete standstill before cleaning.
Wear protective gloves.
The blade disc can be cleaned with a hose with
low pressure water (<1 MPa).
EN
53