Publicité
Les langues disponibles
Les langues disponibles
Use
Note: Remove all packaging
materials from the product.
Insert the plug at the end of the
light chain
4
the mains adapter
Please screw the union nut
of light chain
Note: Pay attention to the
sealing ring, otherwise the IP
protection is not guaranteed.
Insert the mains adapter
into the mains socket.
Press the timer button with LED
indicator
3
light chain
4
ting mode.
The order of the lighting
modes is as follows:
1. combination (combination of all
lighting mode)
2. in wave (LEDs lighting flashing
in changing frequency)
3. sequential (LEDs light up alter-
nating)
4. slow-glow (LEDs slowly light up
alternating)
5. chasing/flash (LEDs flash alter-
nating)
6. slow fade (LEDs light up and
fade out slowly)
24 GB/IE
into the socket of
.
2
5
.
4
2
to switch on to the
or to next ligh-
7. twinkle/flash (LEDs light up
alternating like twinkle)
8. steady on (all LEDs on)
9. switch off the product
Timer function
To switch on the timer function,
press and hold the timer button
with LED indicator
product is connected to the
socket of power supply. The
timer button with LED indicator
will light up green when the
3
timer function is activated.
The product glows permanently
for 6 hours and will be followed
by a subsequent pause of 18
hours. The different light modes
can be use in timer function.
Afterwards, the product will
light up again at its designated
turn on time for 6 hours followed
by a subsequent pause of 18
hours.
To switch off the timer function,
press and hold the timer button
with LED indicator
the light of the timer button with
LED indicator
When the timer function is
switched off, the product glows
continuously.
after the
3
again and
3
will be turned off.
3
Publicité
