Publicité
Les langues disponibles
Les langues disponibles
swivel the product into the
desired position.
When choosing a location, bear
in mind that you will need ad-
ditional space beyond the sur-
face area of the sun sail
(approx. 300 x 200 cm) for the
rope
.
6
Please also make sure that there
is sufficient space around the
outside of the sun sail
that no tripping hazards are
created.
Ensure that the light chain
reach the socket of the mains
adapter
. Max. distance be-
2
tween the mains adapter
the sun sail
is approx. 5 m.
1
Dismantling of the product at
expected wind speeds of more
than 40 km / h (fresh wind, larger
branches and trees move, and
the wind is clearly audible).
Mounting the product
(see Fig. A‒B)
Use the carabiners
connectors
to connect to
8
itself
1
and
1
can
4
and
2
and spring
7
the rings
of the sun sail
9
(located on the corners and
the longer edges of sun sail).
For some case, you may use a
piece of the rope
the carabiners
7
nectors
and rings
8
Alternatively, the sun sail
can also be attached without
spring connectors
biners
. To do this, connect a
7
piece of the rope
the rings
.
9
Note: You can cut the rope
into the length you needed.
Note: The minimum and maxi-
mum force required to mount
and dismount the sun sail
is approx. 50 N and 100 N.
Attach the carabiners
rope
to a suitable location.
6
Note: Also ensure that there
is enough room for people to
pass by safely and that the
rope
does not present a trip
6
hazard.
Install the product lean slightly
for prevent water pockets form
(see Fig.C).
1
to connect
6
or spring con-
.
9
1
and cara-
8
directly to
6
6
1
or
7
GB/IE
23
Publicité
