Publicité
Les langues disponibles
Les langues disponibles
Item
Component
Ambient light
Headlight
Direction
Indicators
Dashboard
Throttle
Function
Inspection
Fault
detection
Charging
Buttons
Steering
Battery
assembly
Important
parts
Controller
Hub motor
Maintenance Method
Check the ambient light and see if it lights normally.
Check the headlight and see if it lights brightly.
Toggle the direction indicator switch to the left/right
respectively, check if the direction indicators on the left/right
side flash normally.
Power on the scooter, the dashboard works properly.
Press and hold the throttle, then release it, checking for
acceleration and deceleration.
After connecting with the Segway-Ninebot app:
1) Update the firmware to the latest version.
2) Check if the notification of the corresponding error code and
possible causes will prompt when the scooter detects an error.
Charge the scooter:
1) Check if the current battery power displays on the dashboard.
2) Check the LED indicator on the battery charger.
Charging: red, Fully charged: green.
Press or toggle the button 3 times without failure.
Test with left turns and right turns (the steering angle is 60°).
No resistance or lag when turning.
The battery need to be replaced when it is charged and
discharged for 500 times or the total mileage is more than
9320 miles (15000 km).
Note: It is recommended to charge once every 60 days for
long-term storage.
It is required that original Segway-Ninebot parts shall be used
for repairs and replacements.
Every 6
After 2 years or
months or
the total
Every 3
every 310
mileage > 3107
months
miles (500
miles (5000
km)
km)
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
EN
√
08
Publicité
