Close the door.
For built-in models, do this before
turning the appliance on.
You can now control the dishwasher from
the App.
DISABLING REMOTE CONTROL
To exit remote control, press the "Wi-Fi"
button on the appliance again.
The "Wi-Fi" indicator will blink very
slowly.
With cycle not in progress:
- The message "REMOTE CONTROL
OFF" appears on the product display. It
will be possible to manually select a
new cycle.
With cycle in progress:
- The message "REMOTE CONTROL
OFF" appears on the product display.
The
display
remaining time. The cycle will be
completed without having control from
the App.
An
alternative
way
control.
Press the "START/RESET"
for 3 secs.
If there is a cycle under way, it will be
cancelled, and the machine will exit
REMOTE CONTROL mode.
The "Wi-Fi" indicator light will flash
slowly. It is now possible to set a new
wash cycle from the control panel.
Press the "ON/OFF"
secs (or power off).
If there is a cycle in progress, it will be
paused and the appliance will exit
REMOTE CONTROL mode.
When switching it on again, the "Wi-Fi"
indicator light will flash slowly and any
cycle in progress will continue from the
point of interruption.
will
then
show
to
exit
remote
button
button for 3
142
Opening
the
CONTROL will be disabled. To resume
control from the App, close the door.
Wi-Fi connection indicator light
Indicates the connection status of the
product to the home Wi-Fi network. It can
be:
- FIXED ON: remote control enabled.
- VERY SLOW FLASHING: remote control
disabled.
- SLOW FLASHING: reset of the Wi-Fi
network (during pairing on the App).
- FAST FLASHING: appliance associated
with the App but no Wi-Fi connection.
Check the correct functioning of the router
or the changed home Wi-Fi credentials
(Network name and / or password). In this
case, update the settings within the App,
the
following
smartphone.
door,
any
the
instructions
REMOTE
on
the