Haier XS 6B0S3FSB Manuel D'utilisation page 179

9. LOADING THE RINSE AID
(Fig. A "3")
Rinse aid
Rinse aid, which is automatically released
during the last rinsing cycle, helps the
dishes to dry quickly and prevents spots
and stains forming.
Filling the rinse aid container
The rinse aid container is next to the
detergent container (fig.A "3").
To open, press the tab on the lid of the
rinse aid dispenser and lift it.
Add rinse aid up to the Max. indication.
If the rinse aid spills out, remove it from

the wash tank.
Spilled rinse aid can cause excessive

frothing during the wash cycle.
Close the lid of the rinse aid dispenser.

The lid clicks into the locking position.

Always use rinse additives that are suitable
for automatic dishwashers.
Models equipped with display or
rinse aid indicator (only on some
models)
When it becomes necessary to fill the rinse
aid container, the display will indicate the
lack of rinse aid (in models with display), or
the designated indicator light on the
dashboard will turn on.
This has been factory-set to level 4, as
this satisfies the majority of users.
Adjusting the amount of rinse aid
ALWAYS start the procedure with the
dishwasher turned off.
1. Switch
ON/OFF"
2. Hold the "SETTINGS
button, a short beep will sound.
3.The "SETTINGS" message appears on
the display.
4. Press the "PROGRAMME SELECTION"
submenu.
5. Choose the "RINSE AID" option.
6. Press "START/RESET"
the regulation levels.
7. Press "PROGRAMME SELECTION"
8.Press "START/RESET"
9. Press "ON/OFF"
124
the appliance
button.
buttons to navigate
to choose the value (R1......R6).
to confirm.
on, press
(5Sec.)"
the
to access
to confirm.