SMC Networks SMC7004VWBR Guide D'installation Rapide page 5

Step 2 - Disable HTTP Proxy
Once you have a valid IP address on your computer, you are ready
to configure the Barricade ™ for your Internet Provider. Before you
can access the web-based administration page, you will need to
verify that the HTTP Proxy feature of your Web browser is disabled.
To do this, please follow the steps below depending
on the browser you are using.
Internet Explorer
1. Open Internet Explorer and click [Stop].
Click [Edit] and select [Preferences].
2. In the Internet Explorer
Preferences window, under
Network, select [Proxies].
3. Uncheck all checked boxes
and click [OK].
7
Netscape
1. Open Netscape and click [Stop].
Click [Edit] and select [Preferences].
2. In the [Preferences] dialog box, on the
left-hand column labeled [Category],
click the [Advanced] option.
3. Under the [Advanced] category, select
the [Proxies] option.
4. Select [Direct Connection to the
Internet] option and click [OK].
Step 3 – Configure the Barricade
When you can access the web-based Administration page, follow
the configuration steps outlined in the manual. Because the
Barricade ™ uses a platform-independent design, the configuration
for Windows-based machines is the same for computers running on
Apple OS.
™
8