Geberit 185 Manuel D'utilisation page 19

Maintenance
Activating cleaning mode
To clean the washbasin tap and the
washbasin, the flush actuation can be
suppressed for a few minutes.
▶
Activate cleaning mode with the
Geberit app, Geberit Service Handy
or Geberit Clean Handy, or
unscrew and remove the shut-off
screw. The flush actuation is
deactivated when the shut-off screw
is removed.
Cleaning intervals
The following tasks must be carried out
when necessary or at the specified intervals
at the latest.
Task
Cleaning the tap housing
Cleaning the tap aerator
Cleaning the basket filter
36028804643541899 © 02-2022
970.656.00.0(00)
Cleaning the tap housing
ATTENTION
Surface damage caused by aggressive
and scouring cleaning agents
▶ Never use aggressive cleaning agents
Prerequisite
–
1
2
Cleaning the tap aerator
Prerequisite
–
1
Interval
Weekly
Monthly
Yearly
2
3
that contain chlorine or are acidic,
abrasive or corrosive.
Cleaning mode is activated.
Clean the tap housing with a soft
cloth and a mild liquid cleaning
agent.
Dry the tap housing with a soft cloth.
Cleaning mode is activated.
Remove the tap aerator using the
maintenance key.
Clean the tap aerator and, if
necessary, descale.
Mount the tap aerator.
EN
19