Publicité
Les langues disponibles
Les langues disponibles
2019 - 2020 F150 CrewCab XLT and SuperCab XLT
Find locations 4, 17, and 18 in the connector
housing and verify they are not populated.
If these locations are populated, discontinue
installation and verify system compatibility.
4
18
17
Insert the terminals into the connector
housing.
NOTE: Terminals will not lock into housing
if they are not orientated correctly. If the
terminal does not lock into housing, flip the
terminal 180 degrees and re-insert.
Location 4 – White Wire
Location 17 – Black Wire
Location 18 – Purple Wire
Terminal Orientation
Bottom Row
Page 6 of 20
Contact KICKER
Terminal Orientation
Top Row
Technical Support at 405-533-7499, or oesupport@kicker.com.
®
Press terminal retainer back into the locked
position.
B-Pillar Trim Panel Removal - SuperCrew
NOTE: Removal steps in this procedure may
contain installation details.
Lower B-Pillar Trim Panel
Remove the front door scuff plate trim
panel.
1. Release the clips and remove the
front door scuff plate trim panel.
2. If equipped. Disconnect the
electrical connector.
© Copyright Ford 2019 FoMoCo
Publicité
