Publicité
Les langues disponibles
Les langues disponibles
2019 - 2020 F150 CrewCab XLT and SuperCab XLT
Route power wire up to cowl opening.
Secure with wire ties.
Route power wire under cowl trim panel and
out opening on opposite side.
Route power wire under bracket and secure
to sheet metal with incorporated retainer.
NOTE: Insure hood hinge mechanism does
not interfere with power wire.
Page 4 of 20
Contact KICKER
Technical Support at 405-533-7499, or oesupport@kicker.com.
®
Make an incision in the rubber grommet and
route power wire into cabin.
Install the power wire connector housing on
the power wire.
1. Insert wires into connector housing.
2. Close terminal retainer cap.
1
© Copyright Ford 2019 FoMoCo
2
Publicité
