Publicité
Les langues disponibles
Les langues disponibles
2019 - 2020 F150 CrewCab XLT and SuperCab XLT
Install supplied retainer around harness at
the position marked with blue tape. Trim
the excess length of the retainer. Attach the
retainer over the stud.
NOTE: Screws and metal retainers are pre-
installed in upper bracket and designed to
snap into sheet metal as assembled. Do not
remove screws or metal retainers during
installation.
1. Press on upper bracket to snap metal
retainers into sheet metal.
2. Connect harness to amplifier.
Page 11 of 20
Contact KICKER
Technical Support at 405-533-7499, or oesupport@kicker.com.
®
1
2
© Copyright Ford 2019 FoMoCo
Publicité
