Publicité
Les langues disponibles
Les langues disponibles
2019 - 2020 F150 CrewCab XLT and SuperCab XLT
Front Controls Interface Module Removal
NOTE: Removal steps in this procedure
may contain installation details.
Release the clips and remove the instrument
panel speaker grill.
NOTE: Models equipped without an
instrument panel grill will only require the
rubber liner to be removed.
Use the General Equipment: Interior Trim
Remover
Remove the bolts, release the clips and
remove upper instrument panel storage tray.
Torque: 22 lb.in (2.5 Nm)
NOTE: Model with instrument panel grill
shown. Model without instrument panel
grill similar.
Remove the bolts and the FCIM.
Disconnect the electrical connectors.
Page 5 of 20
Contact KICKER
Technical Support at 405-533-7499, or oesupport@kicker.com.
®
Audio Front Control Module Removal
Remove the bolts and the ACM.
Disconnect the electrical connectors.
Torque: 22 lb.in (2.5 Nm)
Wire Harness Connection to ACM
Connector
Find the 26 pin ACM connector.
Using a pick tool, slide the terminal retainer
out on both sides until it stops.
© Copyright Ford 2019 FoMoCo
Publicité
